Swiss 1906/29 Luger, produced in 1934, in very good condition with 85% original finish. 5/5 Bore. All visible serial numbers matching.
On the right side of the grip, there is mild edge wear at the forward edge and light to mild edge wear along the upper edge to the rear. There are light scratches in the finish along the high area and light finish wear at the rear of the receiver on the high area. Light edge wear on the trigger guard. Mild edge wear on the bottom corner of the front strap. Grip screw has a tooling mark that looks like a flat head screwdriver had slipped while attempting to remove the screw. On the left side of the frame, there is light edge wear and light finish wear at the forward edge and light edge wear along the upper edge. Light edge wear along the edges of the high area, running to the rear. Light edge wear on the takedown lever. Side plate has mild finish wear at the high area and light edge wear along the outer edge. Safety selector lever has light finish wear on the bar and heavy finish wear on the knob. Light edge wear on the trigger guard. Light edge wear on the bottom of the grip. Grip safety has light finish wear and light patina. Small mark of light finish wear on the front of the trigger guard and small mark of light finish wear near the bottom edge of the front strap.
Receiver has light edge wear on the upper edge on both sides. Light finish wear on the toggle. Mild finish wear on the toggle knobs. Barrel has light finish wear on the left side toward the muzzle and mild finish wear around the muzzle.
Red canevasite grips are in good condition without damage.
Frame is P stamped on the right side at the high area.
C&R eligible. Very discreet import engraving. See our How To Order page for ordering instructions.
This model has the standard 1906/29 features such as a new type toggle with flat, uncheckered toggle knobs; grip safety, wide trigger, narrow trigger guard and a straight grip front strap, no stock lug and barrel chambered in 7.65mm Luger.