DWM Luger 1900/06 - sn 10xxx
DWM Luger 1900/06, delivered to the Swiss military in 1909, in very good condition with 85% finish. 5/5 Bore. All visible serial numbers matching.
This Luger has been refurbished at some point. Both the trigger and the ejector are blued rather than having a straw finish.
Right side of the frame has light finish wear along the high area. Mild to fair edge wear at the forward edge, with light to mild edge wear along the upper edge, continuing to the rear. Light edge wear on the trigger guard. Tooling marks on the grip screw. Very light to light edge wear on the bottom of the grip. Left side of the frame has light to mild edge wear at the forward edge. There are a few marks in the metal at the high area in front of the side plate. The side plate itself also has some surface marks in the metal, as well as light edge wear around the high area and the top edge. Light edge wear along the upper edge of the frame running to the rear. Light finish wear along the side of the frame at the upper rear area. Light mark in the finish from safety selector usage. There are a couple of surface marks in the metal on the trigger guard. Very light to light edge wear on the bottom of the grip. On the underside of the frame, there are a few light marks in the finish in front of the trigger guard. The front strap has mild finish wear at the bottom, a few scattered light scratches, and a mark near the top running perpendicular to the front strap.
Receiver has light edge wear along the upper edge on both sides. Left side of the receiver has a line of light finish wear in front of the side plate. Light finish wear at the rear of the receiver behind the upper area of the frame. Light holster wear on the front and rear sights. Heavy mark in the surface of the metal on the rear of the toggle assembly. Tooling marks on the front sight. Barrel has scattered very light marks in the surface and light finish wear around the muzzle.
One or both grip panels may be replacements. Both grip panels are worn, and the checkering and amount of wear do not mach each other. Left side grip panel has a loose fit. Magazine has correct walnut base with metal plug. Small pressure mark on the right side of the magazine base.
Leather lanyard is attached to the lanyard loop.
No P stamp found.
C&R eligible. Discreet import engraving. See our How To Order page for ordering instructions.